View LA8160V_4353891.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENA0513
Monolithic Linear IC
LA8160V
Overview
AGC Amplifier and Pre Amplifier
The LA8160V is a AGC amplifier for the digital ADC and a pre amplifier for the analog SAW filter.
Features
* VCC = 5V * IF Input Frequency Range * AGC Amplifier Gain * AGC Gain Reduction * AGC Amplifier Output Amplitude * Pre Amplifier Gain * Pre Amplifier Output Amplitude 30 to 100MHz 30dB 40dB 2Vp-p (differential) 29dB 2Vp-p
Functions
* IF AGC control * IF AGC amplifier for AD Converter * Pre Amplifier for SAW Filter * Function mode switch Notes : This device is ESD sensitive. So, the device should be treated carefully. Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Maximum pin voltage Circuit voltages Circuit current Symbol VCC max V max11 V max I6 I7 Allowable power dissipation Operating temperature Storage temperature Pd max Topr Tstg Pin 3, 4, 14 Pin 11 Pin 8, 9 Pin 6 sink current Pin 7 sink current Ta 85C Conditions Ratings 6.0 6.5 VCC 2 2 430* -20 to +85 -55 to +150 Unit V V V mA mA mW C C
*On the board (60x70x1.6mm3 Double-Layers epoxy glass)
Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein.
N2206 MS PC B8-7842 No.A0513-1/7
LA8160V
Recommended Operating Conditions at Ta = 25C
Parameter Recommended supply voltage Operating supply voltage range Symbol VCC VCC op Pin 3, 4, 11, 14 Pin 3, 4, 11, 14 Conditions Ratings 5.0 4.5 to 5.45 Unit V V
Electrical Characteristics
AC Characteristics at Ta = 25C, VCC = 5.0V
Parameter Input frequency range AGC amp section [V8 = Lo] AGC amp circuit current AGC amp maximum gain ICC1 G max 3, 4 6/1, 16 7/1, 16 AGC amp noise figure Intermodulation NF1 IM3 6, 7 6/1, 16 7/1, 16 AGC range GR 6/1, 16 7/1, 16 Output level 1 Output level 2 Maximum AGC voltage LO leakage VO6 VO7 V9 max Lp 6 7 9 6, 7 Maximum gain Lp = 6, 7/11 AGC amp gain = max Pre amp section [V8 = Hi] Pre amp. circuit current Pre amp gain Pre amp noise figure 920k beat level ICC2 G2 NF2 B920 3, 11, 14 11/1, 16 11 11 P/C = 15dB, P/S = 15dB Output level = 2Vp-p Output level Function switch Section AGC amp active Pre amp active AGC amp active V8L V8H I8L 8 8 8 I3, 4, 14 = ON, I11 = OFF I4 = OFF, I3, 11, 14 = ON V8 = 0V I3, 4, 14 = ON, I11 = OFF I8H 8 V8 = 5V I4 = OFF, I3, 11, 14 = ON *1 : Test circuit (1), *2 : Test circuit (2), *3 : Test circuit (3), *4 : Test circuit (4) 200 A 2.0 5 0.8 V V A VO11 11 VIN = 27dBmV *3 1.3 2.0 2.5 Vp-p *4 No signal *3 *3 50 25 67 29 8 -78 -74 79 31 mA dB dB dBc *2 *1 *1 2.5 -48 1.0 1.0 VCC -40 Vp-p Vp-p V dBc V9 = 2.5V VIN = 30dBmV Output level = 1Vp-p Output level < 1dB *1 45 8 54 dB dB No signal V9 = 2.5V *1 *1 29 26 39 30 48 32 mA dB Symbol f (in) Pin No. 1, 16 Conditions min *1 30 Ratings typ max 100 MHz Unit
*1
40
dB
No.A0513-2/7
LA8160V
Package Dimensions
unit : mm (typ) 3107B
5.2 16 9
4.4
6.4
1 0.65 (0.33)
8 0.15 0.22
1.5max
SANYO : SSOP16(225mil)
Pin Description
Pin Number 1 16 IF Input Description Equivalent circuit
0.1 (1.3)
0.5
Bias
1k 1 16
1k
2 3 4 5 10 12 13 15 14
AGC/Pre Amp. GND AGC/Pre Amp. VCC Driver Amp. VCC Driver Amp. GND Driver Amp. GND
Driver Amp. VCC Continued on next page.
No.A0513-3/7
LA8160V
Continued from preceding page Pin Number 11 Description Driver Amp. Output Equivalent circuit
40mA 11
5
6 7
Driver Amp. Output
VCC
30 6 30 7 5mA 5mA
9
IF AGC Control
VCC
1k 9
8
Function switch
VCC
30k 8
No.A0513-4/7
LA8160V
Test Circuit (1)
VCC VCC 1000pF 2.2H 10000pF 0.47H
30pF
1.3k 250 1000pF 50 1000pF
16
15
14
13
12
11
10
9
VAGC
Driver Amp 1000pF AGC /Pre Amp Driver Amp
1000pF AGC 1 2 3 4 5 6 7 8 1000pF 1000pF VCC 510 Spectrum Analyzer 510 51 1000pF
Test Circuit (2)
VCC VCC 1000pF
2.2H
10000pF 0.47H A
30pF
1.3k 250 1000pF VIN
1000pF 16 15 14 13 12 11 10 9 VAGC
Driver Amp 1000pF VIN 1000pF AGC 1 2 3 4 5 6 C 1000pF VCC 510 Spectrum Analyzer 510 51 1000pF A. 45MHz, 40dBmV B. 44MHz C. 44MHz / 45MHz 7 8 1000pF B AGC /Pre Amp Driver Amp
No.A0513-5/7
LA8160V
Test Circuit (3)
VCC VCC 1000pF 2.2H 10000pF 0.47H
30pF
1.3k 250 Spectrum Analyzer 1000pF
1000pF 16 15 14 13 12 11 10 9
Driver Amp 1000pF VIN 1000pF AGC 1 2 3 4 5 6 7 8 1000pF 1000pF VCC 510 51 1000pF VCC 510 51 AGC /Pre Amp Driver Amp
Test Circuit (4)
VCC VCC fp = 45.75MHz P : Ref. 1000pF 2.2H 10000pF 0.47H
30pF
1.3k 250 Spectrum Analyzer 1000pF
1000pF 16 fc = 42.17MHz C : Ref. -15dB 15 14 13 12 11 10 9
Driver Amp 1000pF AGC /Pre Amp Driver Amp
1000pF AGC 1 2 3 4 5 6 7 8 1000pF 1000pF VCC 510 51 1000pF VCC 510 51
fs = 42.25MHz S : Ref. -15dB
No.A0513-6/7
LA8160V
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of November, 2006. Specifications and information herein are subject to change without notice. PS No.A0513-7/7

▲Up To Search▲

Price & Availability of LA8160V

	To Download LA8160V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .